COXCO Training and Consulting..Correspondence courses for Electrical License renewal or CEUs

You are here: Home > Electrical Correspondence Courses

COXCO Training and Consulting provides correspondence courses for
Electrical License renewal, or CEUs, in Conduit Bending (pipe bending),
National Electrical Code; NEC Code Update, AC Motor Controls, Transformers
(single and three phase), Programmable Controllers (PLCs), Article 250
Grounding, Electrical Safety, and Washington State RCW/WAC Update.

Sort By:

Page of 1

4-Hour RCW/WAC Update Course

4-Hour Electrical Safety in the Workplace

Our Price: $60.00

Our Price: $50.00

Course covers Washington State RCW/WAC rules and Codes

The cost includes a copy of the RCW/WAC Rules. Return the booklet with the course materials and receive a $20.00 refund.

Correspondence Course Approved for 4-Hours/CEUs WA2008-068
This course will cover Chapter 19.28 RCW Electricians and Electrical Installations and Chapter 296-46B WAC Electrical Safety Standards, Administration, and Installations codes. The course will acquaint the student with the Revised Codes of Washington (RCW) and the Washington Administrative Codes (WAC) as they relate to: Electricians, Electrical Installations, Electrical Work Permits and Fees, Electrical Training, Electrical Safety Standards, Continuing Education, Administration procedures, and more.

This course will meet the requirements for 4-hours of RCW/WAC Code Update now required by the State of Washington for Electrical License renewal.

The cost includes a CD entitled "Electrical Safety in the Workplace" . Return the CD with the course materials and receive a $10.00 refund.
Correspondence Course Approved for 4-Hours/CEUs WA2008-135
This class is an introduction to Electrical Safety, OSHA and NFPA 70E. Safety statistic are covered, as is the anatomy of a shock. How does a shock occur and what are the affects on the human body. What is a safe workplace? What an electrical safety program should include.

This course is approved by the State of Washington

4-Hour 2008 National Electrical Code� Update

4-Hour Introduction to Conduit Bending Course

Our Price: $80.00

Our Price: $61.95

This 4-hour course covers the some of the significant changes in the 2008 NEC from the 2005 NEC

A course that teaches the basics of conduit bending.

The cost includes the text "Analysis of Change 2008 NEC" Return the book with the course materials and receive a $40.00 refund.
Correspondence Course Approved for 4-Hours/CEUs WA2008-181
This course will use the text 2008 NEC� Analysis of Changes (published by the NFPA and the IAEI) to explain the some of the important revisions to the 2008 NEC�. The reference text provides a comprehensive review of the significant and widespread changes to the 2008 NEC�. The text is well written, well illustrated, and is an excellent way to facilitate the understanding and application of the revisions to the 2008 NEC�. This course is approved in Washington for 4-hours of NEC� Code Update. Also approved for any state that is signatory to the Washington reciprocal agreement.

Cost includes the text "Electricians Guide to Conduit Bending"
Correspondence Course Approved for 4-hours/CEUs WA2005-145
This class covers basic trigonometry and procedure for conduit layout and bending techniques for precision ninety-degree bends, back-to-back bends, kick, offsets, parallel offsets, four bend saddles, and three bend saddles.

NOTE: If you already have the text "Electricians Guide to Conduit Bending" enter Coupon Code conbook when you checkout to receive a $21.95 discount on the price of the course.

4-Hour Intermediate Conduit Bending Course

8-hour Introduction to Programmable Logic Controllers I Class

Our Price: $61.95

Our Price: $158.95

Course covers techniques used for bending rigid pipe with mechanical and hydraulic benders

A course that teaches the basics of Programmable Controllers

The cost includes the text "Electricians Guide to Conduit Bending"
Correspondence Course Approved for 4-Hours/CEUs WA2005-204
Class covers conduit bending techniques for rigid conduit using mechanical and hydraulic benders. Bending methods will include push-through bending, segment bending and concentric bending techniques.

NOTE: If you already have the text "Electricians Guide to Conduit Bending" enter Coupon Code conbook when you checkout to receive a $21.95 discount off the price of the course.

Cost includes the text "Electricians Guide to Programmable Controllers"
Correspondence Course Approved for 8 Hours/CEUs for Oregon, Washington, Montana, Idaho
Class covers the basic concepts and application of programmable logic controllers (PLCs). Material includes what is a PLC?, understanding the input/output section (I/O), processor unit, programming devices, memory organization, numbering system, understanding and using ladder diagrams, relay type instructions, programming a PLC, programming considerations, program control instructions, programming timers and counters.

NOTE: If you already have the text "Electricians Guide to Programmable Controllers" enter Coupon Code pcbook when you checkout to receive a $98.95 discount on the price of the course. The course then is only $60.00.

8-hour Introduction to AC Motor Controls Course

8-hour Intermediate AC Motor Controls Course

Our Price: $93.95

Course provides a basis for understanding controls and control components...

Course covers pump circuits, reduced voltage starters, sequence control, and more.

The cost includes the text "Electricians Guide to AC Motor Controls".
Correspondence Course Approved for 8-hours/CEUs Washington, Oregon, Idaho, Montana
This course covers AC Motor Control circuits, wiring diagrams, ladder diagrams and troubleshoot techniques. The material is presented in a way that is easy to understand and to apply what you have learned.

NOTE: If you already have the text "Electricians Guide to AC Motor Controls" enter Coupon Code acbook when you checkout to receive a $33.95 discount on the price of the course.

The cost includes the text "Electricians Guide to AC Motor Controls".
Correspondence Course Approved for 8-hours/CEUs Washington, Oregon, Idaho, Montana
Class covers motor decelerations/stopping, plugging, dynamic breaking, electric brakes, sequence control, testing and connecting a 9-lead three phase motor, reduced voltage starters, overview of programmable controllers, speed control of AC motors, high capacity and high voltage starters, power factor correction, and control enclosures.

NOTE: If you already have the text "Electricians Guide to AC Motor Controls" enter Coupon Code acbook when you checkout to receive a $33.95 discount on the price of the course.

8-hour Introduction to Transfomers Course

8-hour Three Phase Transformers Course

Our Price: $157.95

All about single phase transformers, theory and application..

Understanding and installing three phase transformers....

The cost includes the text "Delmar's Standard Guide to Transformers"

Correspondence Course Approved for 8 Hours/CEUs Washington, Oregon, Idaho, Montana
This class covers Magnetism, Magnetic Induction, Inductance in AC Circuits, Isolation Transformers, Potential Transformers, Current Transformers, Magnetic Polarities, Auto Transformers, Testing and Load Calculations for Single Phase Transformers.

NOTE: If you already have the text "Delmar's Standard Guide to Transformers" enter Coupon Code txbook when you checkout to receive a $87.95 discount on the price of the course.

The cost includes the text "Delmar's Standard Guide to Transformers"
Correspondence Course Approved for 8 CEUs Washington, Oregon, Idaho, Montana
Class covers voltage and current relationships, three phase formulas, transformer ratings, transformer connections (Wye-Wye, Delta-Delta, Open Delta-Open Delta, Wye-Delta, Delta-Wye, Open Wye-open Delta), transformer installations, over current protection preventive/predictive maintenance, and high leg requirements.

NOTE: If you already have the text "Delmar's Standard Guide to Transformers" enter Coupon Code txbook when you checkout to receive a $87.95 discount on the price of the course.

12-Hour 2008 National Electrical Code� Update

12-hour AC Motor Controls I Course

Our Price: $160.00

Our Price: $133.95

This 12 hour course covers the over 400 changes in the 2008 NEC from the 2005 NEC

This course covers AC motor control circuits, wiring diagrams, ladder diagrams and troubleshoot techniques. The material is presented in a way that is easy to understand and to apply what you have learned.

The cost includes the text "Analysis of Change 2008 NEC" Return the book with the course materials and receive a $40.00 refund.
Correspondence Course Approved for 12-Hours/CEUs in Idaho, Montana, North Dakota, Oregon
This course will use the text 2008 NEC� Analysis of Changes (published by the NFPA and the IAEI) to explain the most important revisions to the 2008 NEC�. The reference text provides a comprehensive review of the significant and widespread changes to the 2008 NEC�. The text is well written, well illustrated, and is an excellent way to facilitate the understanding and application of the revisions to the 2008 NEC�. This course is approved in Oregon for 12-hours of NEC� Code Update. Also approved for any state that is signatory to the Oregon reciprocal agreement.

The cost includes the text "Electricians Guide to AC Motor Controls".
Correspondence Course Approved for 12-hours/CEUs in Montana, North Dakota, Oregon, Idaho

Class covers manual starters, contactors, magnetic starters, overload devices, two wire control circuits, fuse checking, troubleshooting control circuits, control components, pilot devices, parallel stop-start stations, automatic control circuits, jogging circuits, circuit protection, reversing control circuits, electrical and mechanical interlocks, and reversing with time delays. Covers Article 430 of the National Electrical Code�.

NOTE: If you already have the text "Electricians Guide to AC Motor Controls" enter Coupon Code acbook when you checkout to receive a $33.95 discount on the price of the course.

8-Hour 2008 National Electrical Code Update Class

National Electrical Code 430, Installation and Calculations

Our Price: $100.00

Our Price: $93.95

2008 national Electrical Code Update Class

Learn how to design and install motor Circuits

8-hour Class Approved for 8 CEUs Washington, Oregon, Idaho, Montana
This course covers the changes made in the 2008 National Electrical Code from the previous 2005 edition of the National Electrical Code.

8-Hour Class Approved for 8 CEUs in Idaho, Montana, North Dakota, Oregon, Washington State
This class covers the calculations and installation requirements for motors and motor control systems to meet the standards of Article 430 of the NEC and JIC standards. The class includes: terminology, motor nameplate requirements, calculating motor circuit conductors, branch circuit overcurrent protective devices, motor and branch circuit overload protection, installation of controllers and disconnects, motor control circuits conductors, feeders and feeder taps.

8-hour Introduction to Programmable Logic Controllers II Class

Our Price: $158.95

Understanding advanced PLC programming techniques..

Cost includes the text "Electricians Guide to Programmable Controllers"
Correspondence Course Approved for 8 Hours/CEUs Washington, Idaho, Montana, Oregon
This class covers PLC Programming Considerations, Program Control Instructions, Programming Timers, Programming Counters, Data Manipulation, Math Functions, Word and File Moves, Sequencers, Programming with Boolean, Start-up and Troubleshooting.

NOTE: If you already have the text "Delmar's Standard Guide to Transformers" enter Coupon Code plcbook when you checkout to receive a $98.95 discount on the price of the course. The course then is only $60.00.